[Reader-users] help re-calibrating reader?

[David B Andrews]

Ed:

The question here is what exactly is coming unplugged.  Is it the cord that goes into the wall, the end that goes to or from the power brick, or the plug that connects directly to the camera.  If it is the first, the wall, then that is a problem on your end.  If it is the second, the power brick, then you could either try a new cord that fits better, or wrap a little tape around the end of the cord, where it goes into the power brick * to make it fit tighter.  If it is the cord that goes into the Reader, then something may be off in your camera  * the jack, or you might be able to take care of this with very careful placement of the cord, and camera when charging.  It may be necessary to trap the cord or to do something to prevent it or the camera from being moved.

When I had a beta unit * it, the connection, seemed a little loose to me, but if I was careful, it seemed to charge ok.

Dave



David Andrews
Chief Technology Officer
Minnesota State Services for the Blind
2200 University Ave. W., #240
St. Paul, MN  55114-1840
(651) 642-0513  Office
(612) 730-7931  Cell
(651) 649-5927  Fax


>>> edmeskys at localnet.com 1/22/2008 4:17 PM >>>
Cindy, the problem I have with the reader is that the power cord will not
stay plugged in. I left it plugged in when I went on a trip, and when I got
home I found that it had unplugged and was dead. Ed Meskys


Edmund R. Meskys
NIEKAS Publications
National Federation of the Blind of N.H.
Moultonboro Lions Club
edmeskys at localnet.com 
322 Whittier Hwy
Moultonboro NH 03254-3627
my credo:
Clinton lied, nothing happened
Bush lied, thousands died
and over 3,000 permanently brain injured

_______________________________________________
Reader-users mailing list
Reader-users at nfbnet.org 
http://www.nfbnet.org/mailman/listinfo/reader-users