[Reader-users] Earphone Answer?
JD Townsend
1587 at bellsouth.net
Thu Jan 17 07:30:02 CST 2008
Hi Jim and List:
I found that I'd never responded to this note.
I have found that headphones with smaller plugs work well, but
there are many headphones that have clunkier plugs that work only
sometimes. It is the fabric of the case that gets in the way.
Thank you for your assistance.
JD Townsend
Helping the light dependent to see.
Daytona Beach, Florida, Earth
>----- Original Message -----
>From: James Gashel <jim at knfbreader.com
>To: Kurzweil National Federation of the Blind Reader user
list<reader-users at nfbnet.org
>Date sent: Sun, 14 Oct 2007 10:02:29 -0400
>Subject: Re: [Reader-users] Earphone Answer?
>Hi J. D.:
>The earphone plug should be tight in the jack. You should
>experiment with pressing it into the jack quite firmly, if you
>have not already done so. If you still can't get a tight
>connection, do another experiment by unfastening the velcro flap
>and plugging the earphone directly into the jack, not through the
>hole provided in the casing. If by-passing the casing still
>leaves you with a loose connection, there is a problem with the
>PDA, which must be fixed. If you get a tight connection when you
>by-pass the outer casing, we can help you to enlarge the hole
>provided for the earphone jack.
>Please call me at (443) 854-0854 for more help with this after
>you have checked it out as suggested above.
>Thanks, JG
>> ----- Original Message -----
>>From: "Hope Hein" <hmhein at verizon.net
>>To: <reader-users at nfbnet.org
>>Date sent: Sun, 14 Oct 2007 08:26:51 -0400
>>Subject: Re: [Reader-users] Earphone Answer?
>>Hi!
>>My earphone works fine. Sometimes I have to push it in firmly.
>Maybe you could contact your dealer.
>>Hope
>>-----Original Message-----
>>..From: "JD Townsend"<1587 at bellsouth.net
>>..Sent: 10/13/07 1:42:30 PM
>>..To: "reader-users at nfbnet.org"<reader-users at nfbnet.org
>>..Subject: [Reader-users] Earphone Answer?
>>..
>>.. Hello All:
>>..
>>..There are times when the use of the earphone would be helpful.
>>..But, I have yet to find a way to make it work.
>>..
>>..If I wiggle an earphone jack a little bit it works just fine,
>but
>>..with the tiniest jiggle the speaker is again engaged. I have
>>..tried a variety of earphones but the loose connection
>continues.
>>..
>>..Has anyone found a method to secure a sound connection? I am
>>..using model b, perhaps this is less of an issue with model a?
>>..
>>.. JD Townsend
>>.. Daytona Beach, Florida, Earth
>>..Helping the light dependent to see.
>>.._______________________________________________
>>..Reader-users mailing list
>>..Reader-users at nfbnet.org
>>..http://www.nfbnet.org/mailman/listinfo/reader-users
>>..
>>_______________________________________________
>>Reader-users mailing list
>>Reader-users at nfbnet.org
>>http://www.nfbnet.org/mailman/listinfo/reader-users
>_______________________________________________
>Reader-users mailing list
>Reader-users at nfbnet.org
>http://www.nfbnet.org/mailman/listinfo/reader-users
More information about the Reader-users
mailing list