[Reader-users] My reader will not turn on

[Gary Wunder]

You can download the new software from KNFBREADER.COM onto your card and you 
will be fine.

Gary


----- Original Message ----- 
From: "Stanzel, Susan - Kansas City, MO" <susan.stanzel at kcc.usda.gov>
To: "Kurzweil National Federation of the Blind Reader user list" 
<reader-users at nfbnet.org>
Sent: Tuesday, November 06, 2007 10:51 AM
Subject: Re: [Reader-users] My reader will not turn on


>I used a newer Reader at the Kansas convention. It had different
> software also. The F1 and F2 were beside each other and then F3 and F4
> were below F1 and F2. Then it sounded different when the camera was
> turned on. Can I download software from the computer or do I wait until
> new software comes out. I thought I was fine and used that SD card to
> update my Empower. (grin).
>
> Susie Stanzel
>
> -----Original Message-----
> From: reader-users-bounces at nfbnet.org
> [mailto:reader-users-bounces at nfbnet.org] On Behalf Of Mike Freeman
> Sent: Tuesday, November 06, 2007 10:05 AM
> To: Kurzweil National Federation of the Blind Reader user list
> Subject: Re: [Reader-users] My reader will not turn on
>
> Don't remember now but they are quite brief. Basically what happens is
> that a sighted person touches all four corners of the screen, following
> a symbol around the screen. When the PDA gives this the okay, the system
>
> asks the sighted person for the time zone. When this is entered, it may
> ask for the time (I forget). When this is done, it says the PDA is ready
>
> for use. However, this is means that it is ready as a normal PDA. At
> this point, stick in the SD card with the Reader software and you will
> hear appropriate messages telling you that the Reader software is being
> loaded into the PDA.
>
> Mike
>
>  ----- Original Message ----- 
>  From: Stanzel, Susan - Kansas City, MO
>  To: Kurzweil National Federation of the Blind Reader user list
>  Sent: Tuesday, November 06, 2007 6:48 AM
>  Subject: Re: [Reader-users] My reader will not turn on
>
>
>  Where are the instructions in the manual?
>
>
>  Susie Stanzel
>
>  -----Original Message-----
>  From: reader-users-bounces at nfbnet.org
>  [mailto:reader-users-bounces at nfbnet.org] On Behalf Of Mike Freeman
>  Sent: Monday, November 05, 2007 11:16 PM
>  To: Kurzweil National Federation of the Blind Reader user list
>  Subject: Re: [Reader-users] My reader will not turn on
>
>  You'll probably need to get a sighted person help you recalibrate the
>  Reader. Instructions are in he manual.
>
>  Mike
>
>    ----- Original Message ----- 
>    From: Kathy Davis
>    To: 'Kurzweil National Federation of the Blind Reader user list'
>    Sent: Monday, November 05, 2007 6:56 PM
>    Subject: [Reader-users] My reader will not turn on
>
>
>    Hi List,
>
>    Somehow the plug where I charge my reader went bad and subsequently,
>  even
>    though I have charged the unit fully, I can not get any sound from
> it.
>    Please tell me what I need to do.
>
>    Thank you,
>
>    Kathy Davis
>    President NFBF
>    kdavisnfbf at cfl.rr.com
>    800-282-5946
>    386-677-6886
>
>
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
>  ------
>
>
>    _______________________________________________
>    Reader-users mailing list
>    Reader-users at nfbnet.org
>    http://www.nfbnet.org/mailman/listinfo/reader-users
>  _______________________________________________
>  Reader-users mailing list
>  Reader-users at nfbnet.org
>  http://www.nfbnet.org/mailman/listinfo/reader-users
> _______________________________________________
> Reader-users mailing list
> Reader-users at nfbnet.org
> http://www.nfbnet.org/mailman/listinfo/reader-users