[Reader-users] AnIntroductionAnd AQuestionAboutPositioningDocument For Reading

Tue Nov 6 07:57:23 CST 2007

Hello Pam and Terry,
The stand is as you discribed, as for the cradle piece it does also fold up in the middle of the support. Also the cradle moves to a flat possition along the folded support. 
One other tip when unfolding the legs supports be careful how you do it, because on the end of each corner there is a non slip grip pad, and you pull the supports legs out the wrong way you could unstick the pad(s).
I also like the stand for use at home and on the go. I have problems with my hands and when I first got the unit I wondered if I was going have to figure out something for myself until I heard about the stand.
Michelle Foster
  ----- Original Message ----- 
  From: Powers, Terry (NIH/OD/DEAS) [E]<mailto:powerst at dcpcepn.nci.nih.gov> 
  To: Kurzweil National Federation of the Blind Reader user list<mailto:reader-users at nfbnet.org> 
  Sent: Tuesday, November 06, 2007 6:55 AM
  Subject: Re: [Reader-users] AnIntroductionAnd AQuestionAboutPositioningDocument For Reading

  Hi Pam;
  The stand folds up into 2 pieces that will fit in a book bag or back
  pack easily.  The legs of the base fold in and make a single 3 layered
  piece.  The arm and cradle for the reader comes out of the back of the
  stand and is all one piece.  When carying, you only have 2 pieces to
  cary.  I have forgotten if the arm with the cradle folds in any way.  I
  saw it assembled and disassembled at convention, but mine is still in
  its packing.  I have to deside where I am going to use it.  I am
  delighted that I can take pictures as well as I can for short term.  We
  were very fearful that my hands would be to shaky because of my
  epelepsi.
  Hope I have helped answer your question.
  Terry Powers
  powerst at mail.nih.gov<mailto:powerst at mail.nih.gov>

  -----Original Message-----
  From: Pam Drake [mailto:pamdrake at drakelroy.com] 
  Sent: Friday, November 02, 2007 2:34 PM
  To: 'Kurzweil National Federation of the Blind Reader user list'
  Subject: Re: [Reader-users] AnIntroductionAnd
  AQuestionAboutPositioningDocument For Reading

  Does the stand have to be disassembled if it is to be carried?  How
  small a package results?  My main reason for not just jumping to order
  one is portability.  

  Just curious, and I'll have a better idea of whether I want to purchase
  it if I can't learn to read comfortably without it.

  -----Original Message-----
  From: reader-users-bounces at nfbnet.org<mailto:reader-users-bounces at nfbnet.org>
  [mailto:reader-users-bounces at nfbnet.org] On Behalf Of James Gashel
  Sent: Friday, November 02, 2007 9:41 AM
  To: 'Kurzweil National Federation of the Blind Reader user list'
  Subject: Re: [Reader-users] An IntroductionAnd
  AQuestionAboutPositioningDocument For Reading

  Hi Bill:

  The stand can be purchased from the NFB "Independence Market" for
  $150.00.
  The stand has a base consisting of two parallel legs connected by a
  third cross-arm that runs between the two.  These legs form a reading
  area that is slightly wider than an 8-1/2 inch wide page.  The legs form
  the left and right boundaries of the viewing area, and the connecting
  cross-arm is the top.  The corners at the right and left top are eich 90
  degrees.  

  The other part to the stand is the cradle and extension arm which slides
  into a slot in the base.  The slot is preconfigured to place the
  extension arm and cradle at an angle so the cradle is held at 15 inches
  above the viewing area and lined up so the camera can take a perfect
  picture every time.  The cradle holds the Reader in the right position
  with no need to attach the Reader with mounting brackets or screws.  It
  is very convenient to remove without disturbing the alignment of the
  stand.  

  Thanks, J. G.
  *************
  James Gashel
  Vice President of Business Development
  K-NFB Reading Technology, Inc.
  telephone (443) 854-0854
  toll free (866) 836-9988
  fax (781) 263-9999
  jim at knfbreader.com<mailto:jim at knfbreader.com>

  -----Original Message-----
  From: reader-users-bounces at nfbnet.org<mailto:reader-users-bounces at nfbnet.org>
  [mailto:reader-users-bounces at nfbnet.org] On Behalf Of Bill Outman
  Sent: Friday, November 02, 2007 10:00 AM
  To: Kurzweil National Federation of the Blind Reader user list
  Subject: Re: [Reader-users] An Introduction And
  AQuestionAboutPositioningDocument For Reading

  Hi, list.  

  Glad I'm back on after an absence.  

  Just curious, how much does that stand cost and can you describe it?  

  Bill Outman 

  _______________________________________________
  Reader-users mailing list
  Reader-users at nfbnet.org<mailto:Reader-users at nfbnet.org>
  http://www.nfbnet.org/mailman/listinfo/reader-users<http://www.nfbnet.org/mailman/listinfo/reader-users>
  _______________________________________________
  Reader-users mailing list
  Reader-users at nfbnet.org<mailto:Reader-users at nfbnet.org>
  http://www.nfbnet.org/mailman/listinfo/reader-users<http://www.nfbnet.org/mailman/listinfo/reader-users>
-------------- next part --------------
Hello Pam and Terry,
The stand is as you discribed, as for the cradle piece it does also fold up in the middle of the support. Also the cradle moves to a flat possition along the folded support.
One other tip when unfolding the legs supports be careful how you do it, because on the end of each corner there is a non slip grip pad, and you pull the supports legs out the wrong way you could unstick the pad(s).
I also like the stand for use at home and on the go. I have problems with my hands and when I first got the unit I wondered if I was going have to figure out something for myself until I heard about the stand.
Michelle Foster
----- Original Message -----
From:
mailto:powerst at dcpcepn.nci.nih.gov Powers, Terry (NIH/OD/DEAS) [E]
To:
mailto:reader-users at nfbnet.org Kurzweil National Federation of the Blind Reader user list
Sent:
Tuesday, November 06, 2007 6:55 AM
Subject:
Re: [Reader-users] AnIntroductionAnd AQuestionAboutPositioningDocument For Reading
Hi Pam;
The stand folds up into 2 pieces that will fit in a book bag or back
pack easily.  The legs of the base fold in and make a single 3 layered
piece.  The arm and cradle for the reader comes out of the back of the
stand and is all one piece.  When carying, you only have 2 pieces to
cary.  I have forgotten if the arm with the cradle folds in any way.  I
saw it assembled and disassembled at convention, but mine is still in
its packing.  I have to deside where I am going to use it.  I am
delighted that I can take pictures as well as I can for short term.  We
were very fearful that my hands would be to shaky because of my
epelepsi.
Hope I have helped answer your question.
Terry Powers
mailto:powerst at mail.nih.gov powerst at mail.nih.gov

-----Original Message-----
From: Pam Drake [mailto:pamdrake at drakelroy.com]
Sent: Friday, November 02, 2007 2:34 PM
To: 'Kurzweil National Federation of the Blind Reader user list'
Subject: Re: [Reader-users] AnIntroductionAnd
AQuestionAboutPositioningDocument For Reading
Does the stand have to be disassembled if it is to be carried?  How
small a package results?  My main reason for not just jumping to order
one is portability. 
Just curious, and I'll have a better idea of whether I want to purchase
it if I can't learn to read comfortably without it.
-----Original Message-----
From: mailto:reader-users-bounces at nfbnet.org reader-users-bounces at nfbnet.org
[mailto:reader-users-bounces at nfbnet.org] On Behalf Of James Gashel
Sent: Friday, November 02, 2007 9:41 AM
To: 'Kurzweil National Federation of the Blind Reader user list'
Subject: Re: [Reader-users] An IntroductionAnd
AQuestionAboutPositioningDocument For Reading
Hi Bill:
The stand can be purchased from the NFB "Independence Market" for
$150.00.
The stand has a base consisting of two parallel legs connected by a
third cross-arm that runs between the two.  These legs form a reading
area that is slightly wider than an 8-1/2 inch wide page.  The legs form
the left and right boundaries of the viewing area, and the connecting
cross-arm is the top.  The corners at the right and left top are eich 90
degrees. 
The other part to the stand is the cradle and extension arm which slides
into a slot in the base.  The slot is preconfigured to place the
extension arm and cradle at an angle so the cradle is held at 15 inches
above the viewing area and lined up so the camera can take a perfect
picture every time.  The cradle holds the Reader in the right position
with no need to attach the Reader with mounting brackets or screws.  It
is very convenient to remove without disturbing the alignment of the
stand. 
Thanks, J. G.
*************
James Gashel
Vice President of Business Development
K-NFB Reading Technology, Inc.
telephone (443) 854-0854
toll free (866) 836-9988
fax (781) 263-9999
mailto:jim at knfbreader.com jim at knfbreader.com
-----Original Message-----
From: mailto:reader-users-bounces at nfbnet.org reader-users-bounces at nfbnet.org
[mailto:reader-users-bounces at nfbnet.org] On Behalf Of Bill Outman
Sent: Friday, November 02, 2007 10:00 AM
To: Kurzweil National Federation of the Blind Reader user list
Subject: Re: [Reader-users] An Introduction And
AQuestionAboutPositioningDocument For Reading
Hi, list. 
Glad I'm back on after an absence. 
Just curious, how much does that stand cost and can you describe it? 
Bill Outman
_______________________________________________
Reader-users mailing list
mailto:Reader-users at nfbnet.org Reader-users at nfbnet.org
http://www.nfbnet.org/mailman/listinfo/reader-users http://www.nfbnet.org/mailman/listinfo/reader-users
_______________________________________________
Reader-users mailing list
mailto:Reader-users at nfbnet.org Reader-users at nfbnet.org
http://www.nfbnet.org/mailman/listinfo/reader-users http://www.nfbnet.org/mailman/listinfo/reader-users