[Reader-users] My reader will not turn on

[Jacob Kruger]

FWIW, I have had similar issues in the past a couple of times.

The first time I asked the support guys, they told me to try two different 
methods of resetting the reader.

Firstly, keep it plugged in to the charging system, then firstly, try F1 and 
then F3.

If this does nothing, then the reset button which is on the bottom edge of 
the reader sort of on the left side, and I normally sort of hold it in for 
around 3 seconds, after which the reader should reset, and you will normally 
initially hear the welcome message before the normal voice tells you the 
software version, and then does the normal startup procedure.

HTH

Jacob Kruger
Blind Biker
Skype: BlindZA
'...Fate had broken his body, but not his spirit...'

----- Original Message ----- 
From: "Kathy Davis" <kdavisnfbf at cfl.rr.com>
To: "'Kurzweil National Federation of the Blind Reader user list'" 
<reader-users at nfbnet.org>
Sent: Tuesday, November 06, 2007 4:56 AM
Subject: [Reader-users] My reader will not turn on


> Hi List,
>
> Somehow the plug where I charge my reader went bad and subsequently, even
> though I have charged the unit fully, I can not get any sound from it.
> Please tell me what I need to do.
>
> Thank you,
>
> Kathy Davis
> President NFBF
> kdavisnfbf at cfl.rr.com
> 800-282-5946
> 386-677-6886
>
>
>
>
>
>


--------------------------------------------------------------------------------


> _______________________________________________
> Reader-users mailing list
> Reader-users at nfbnet.org
> http://www.nfbnet.org/mailman/listinfo/reader-users
>