[Reader-users] Upgrading The Reader: What Card To Use?

[Jacob Kruger]

I'm not 100% sure, but I think that the software SDCard that comes with the 
reader is meant to be kept as a 'backup' in case something goes wrong, and 
then you could use it to 'revert'/reload back to the original 
software/configuration.

For my upgrades, I just use a spare SDRam/MMC card I have lying around, and 
then just follow the instructions that come with the download, which are 
relatively simple anyway, and have worked fine for me for the last 3 times 
or so.

HTH

Jacob Kruger
Blind Biker
Skype: BlindZA
'...Fate had broken his body, but not his spirit...'

----- Original Message ----- 
From: "Pam Drake" <pamdrake at drakelroy.com>
To: "'Kurzweil National Federation of the Blind Reader user list'" 
<reader-users at nfbnet.org>
Sent: Tuesday, December 11, 2007 9:21 AM
Subject: [Reader-users] Upgrading The Reader: What Card To Use?


>I recall reading in the manual that the S D card containing the software 
>and
> supplied with the Reader should not be overwritten and used to upgrade the
> software.  Am I interpreting this correctly, or does this mean that this
> card should be reserved for the Reader software upgrades only, and not 
> used
> for other devices, as I have read some people have done, only to find they
> have needed to re-install the Reader software originally contained on the
> card?
>
> Please clarify.  I have a second HC S D card which I can use for the
> purpose, but want to make sure I understand the original instructions.
>
> Thanks very much in advance.
>
> Pam
>
>
>
> _______________________________________________
> Reader-users mailing list
> Reader-users at nfbnet.org
> http://www.nfbnet.org/mailman/listinfo/reader-users
>