[Reader-users] new KNFB reader user poses questions

[Gashel, James]

Hi Kim:

The two different format settings are under the user settings menu.  The
choices are (1) books, articles, and labels; and (2) bills and memos.  

Changing the format will often produce a different result depending on
what you are trying to read.  The default should be "books, articles,
and labels."   

-----Original Message-----
From: reader-users-bounces at nfbnet.org
[mailto:reader-users-bounces at nfbnet.org] On Behalf Of Kim Morrow
Sent: Tuesday, November 28, 2006 11:51 AM
To: 'Kurzweil National Federation of the Blind Reader users list'
Subject: Re: [Reader-users] new KNFB reader user poses questions

This is an excellent suggestion. I'm sure it's in the manual--but what
steps do I need to take to tell the reader the type of format it's
reading? What mode do I go into?

Kimberly


-----Original Message-----
From: reader-users-bounces at nfbnet.org
[mailto:reader-users-bounces at nfbnet.org] On Behalf Of mhingson
Sent: Tuesday, November 28, 2006 8:29 AM
To: 'Kurzweil National Federation of the Blind Reader users list'
Subject: Re: [Reader-users] new KNFB reader user poses questions

Kimberly,

In addition to Cindy's comments you might also try to learn whether or
not the materials you are trying to read are or are not in column
format.  Books and articles may be formatted with columns while many
single sheets are not.  Scanning accuracy often can be improved markedly
by telling the reader the correct formatting.

Mike Hingson


-----Original Message-----
From: reader-users-bounces at nfbnet.org
[mailto:reader-users-bounces at nfbnet.org] On Behalf Of Cindy Handel
Sent: Tuesday, November 28, 2006 5:58 AM
To: Kurzweil National Federation of the Blind Reader users list
Subject: Re: [Reader-users] new KNFB reader user poses questions

Kimberly,

I think Jan's comments about fussing too much with the placement of the
reader are correct.  If you hold the reader above the page, about 16
inches, as the manual suggests, and don't worry a whole lot about the
placement (just try to hold it pretty much center), you should get a
good picture.

Also, be sure that the settings have the camera flash always on, and
resolution high.  Some people have found it helpful to place the camera
flat on the page and then lift straight up to the 16 inch height, and
then snap the picture. You shouldn't have to worry, much about your
surroundings when taking a picture.

Cindy
----- Original Message -----
From: "Kim Morrow" <morrowmediakc at yahoo.com>
To: <reader-users at nfbnet.org>
Sent: Tuesday, November 28, 2006 3:20 AM
Subject: [Reader-users] new KNFB reader user poses questions


            A few days ago, I had the honor and privilege of receiving a
KNFB Reader as a gift. Since that time, I have logged in quite a number
of
hours reading the manuals cover to cover and experimenting with the
device.
While the KNFB Reader appears to be a marvelous tool, I am experiencing
challenges in taking consistently effective pictures of material that
would
render the material legible. I'm quite confident that such is the case
with
many a new KNFB Reader user, expecially those who, like me, are totally
blind from birth and have thus not experienced the opportunity to learn
about conditions that make for optimal picture-taking environments.



Here is the greatest challenge I am currently experiencing: No matter
how
clear the text I am attempting to scan may be, I am discovering that
there
is little consistency in how the scan will turn out. I have attempted to
always orient myself from the same portion of the page, e.g. always from
the
upper righthand or lefthand corner or always from the middle), with very
mixed results ranging from an almost perfect scan to totally illegible.
I
have attempted to cover one side of a text-filled book (containing no
pictures), with a white sheet of typing paper, so that I am sure the
correct
side of a page is read. I have asked sighted friends to assist me in
minimizing glare and to assist in the location of optimal scanning
environments e.g. surrounding surfaces that are not too dark,
Etc.)-still
with extremely mixed results.



My question, then: What are some rules of the road not listed in the
manuals
that might make the scanning experience for a first-time user more
consistent and effective? My expectations for the capabilities of this
device are much higher than what I have thus far been able to achieve,
since
I am attempting to scan texts with no pictures with very standard print.
If
I were attempting to scan CD covers or cereal boxes, I believe my
expectations for excellence would be quite out of line.



Are there any consistent guidelines I can follow beyond those listed in
the
manual in terms of taking effective pictures of material?



Sincerely,



Kimberly Morrow



morrowmediakc at yahoo.com






------------------------------------------------------------------------
--------


_______________________________________________
Reader-users mailing list
Reader-users at nfbnet.org
http://www.nfbnet.org/mailman/listinfo/reader-users


_______________________________________________
Reader-users mailing list
Reader-users at nfbnet.org
http://www.nfbnet.org/mailman/listinfo/reader-users

_______________________________________________
Reader-users mailing list
Reader-users at nfbnet.org
http://www.nfbnet.org/mailman/listinfo/reader-users

_______________________________________________
Reader-users mailing list
Reader-users at nfbnet.org
http://www.nfbnet.org/mailman/listinfo/reader-users